2.5
Layout and operation
Figure
HON 512 with HON 650 pilot user manual
The gas pressure regulator is made up of the following assemblies:
Figure
No.
Description
1
HON 650 pilot
▪ Optionally single-stage or two-stage
(with or without load limiting stage)
2
HON 512 actuator assembly
▪ For nominal inlet sizes of DN 25 to
DN 100:
▪ 3-piece body with / without
expander for pressure ratings
PN 25, PN 40, ANSI Class 300, ANSI
Class 600
▪ 2-piece body without expander for
pressure ratings PN 16,
ANSI Class 150
▪ For nominal inlet sizes of DN 150 to
DN 300:
▪ 2-piece body without expander for all
pressure ratings
▪ 2-piece body with expander for pres-
sure ratings PN 25, PN 40, ANSI Class
300, ANSI Class 600
▪ Noise-reducing outlet duct in all devices
with an expander
Description
15