Connecting The Power Cables - Dell PowerEdge C6320 Getting Started

Connecting the Power Cable(s)
Figure 6. Connecting the Power Cable
Connect the system's power cable(s) to the system and, if a monitor is used, connect the
monitor's power cable to the monitor. Plug the other end of the power cables into a
grounded electrical outlet or a separate power source such as an uninterrupted power
supply or a power distribution unit.
NOTE: The system supports both AC and HVDC power inputs. Your
system can support up to two 1400 W power supply units (200-240 VAC
nominal input voltage) or up to two 1600 W power supply units
(200-240 VAC nominal input voltage). 1400 W power supply unit is
supported only for China.
12 | Getting Started With Your System