Advertisement
8oz Polypropylene Container (F)
Image for reference only: actual product may vary
To use the 8oz polypropylene container (F) with FUNtainer® food storage system:
1. Remove the lid (F1) by twisting it counterclockwise.
2. Remove gasket (F2) from underside of lid (F1).
3. Wash all parts separately and allow to dry. Once all parts have dried, re-
assemble gasket (F2) in lid (F1).
a. Ensure gasket (F2) is properly seated to minimize leaking.
4. Fill container with contents. Do not overfill: leave space at top of container for lid
(F1) to avoid overflow.
5. Replace lid (F1) by twisting it clockwise.
a. Ensure lid (F1) is closed all the way to minimize leaking.
6. Place the container (F) in the circular section of the tray (C1).
To use the 2oz polypropylene container (G) with FUNtainer® food storage system:
1. Remove lid (G1) by pulling upwards.
2. Wash all parts separately and allow to dry.
3. Fill container with contents. Do not overfill: leave space at top of container for lid
(G1) to avoid overflow.
4. Replace lid (G1) by snapping it back on.
5. Place the 2oz container (G) in the smaller rectangular section located towards
the front of the tray. Note there is a circular indentation in the base of the tray
(C1) configured to receive the container (G).
F1
F2
2oz Polypropylene Container (G)
G1
Advertisement
