Bose II Owner's Manual page 16

Using the Bose
Figure 9
Connector technical
information
16
®
Aviation Headset
5. Approved adhesives for use with this connector are Ciba-Geigy Uralane 5754-
A/B, Lord 710, or VTCS-6 Vibratite. Do not let any cyanoacrylate-based
adhesives (e.g., Loctite), flux remover, or other caustic compounds come into
contact with the installed connector body. These chemicals will cause
deterioration and/or irreparable damage to the connector. For information on
chemical compatibility and connector part number, contact LEMO USA, Santa
at 1-800-444-5366.
Rosa, CA
PANEL HOLE REQUIRED
12.6mm
.5"
RECEPTACLE - PINOUT (FRONT VIEW)
PIN 1
AIRCRAFT INTERFACE SCHEMATIC
RED
BLK
BLK
WHT
BLK
WHT
WH/BLU
BLK
14.1mm
.56"
PIN 6
•
1 V+IN
•
2 GND
•
3 COMM L
•
4 COMM R
•
5 MIC HI
•
6 MIC LO