Antenna; Antenna Location And Rf Trace Routing; Header J10 Of The Cc3000 Boosterpack Evm Board (Bottom View) - Texas Instruments CC3000 User Manual

Antenna

Table 2-6 describes the signals on J10.
Table 2-6. Header J10 of the CC3000 BoosterPack EVM Board (Bottom View)
Pin
1
2
3
4
5
6
7 WL_SPI_DOUT
8
9
10
2.3 Antenna
The ACX ceramic mounts on the BoosterPack EVM board with a specific layout and matching circuit for
the radiation tests conducted in FCC, CE, and IC certifications.
ceramic antenna on the BoosterPack EVM board and the RF trace routing from the CC3000 module to the
antenna.
10
CC3000 BoosterPack EVM Board
Pin Name
GND
WL_SPI_IRQ
WL_SPI_CS
Reserved
Reserved
WL_SPI_DIN
Reserved
Reserved
Reserved
AT8010-E2R9HAA
X
Figure 2-3. Antenna Location and RF Trace Routing
Copyright © 2012–2014, Texas Instruments Incorporated
Pin Type
– Ground
Output Host interface SPI interrupt request
Input Host interface SPI chip select
– Reserved
– Reserved
Input Host interface SPI data input
Output Host interface SPI data output
– Reserved
– Reserved
– Reserved
Figure 2-3
Z
Y
SWRU331-003
SWRU331A – November 2012 – Revised August 2014
www.ti.com
Descriptions
shows the location of the ACX
Submit Documentation Feedback