Hardware Diagnostics - Panasonic CF-19 Series Operating Instructions Manual

Hardware Diagnostics

If it appears that the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility
to determine whether or not there is a problem.
If the utility discovers a problem in the hardware, contact Panasonic Technical Support.
Software cannot be checked using this utility.
Hardware that can be checked using the PC-Diagnostic Utility
CPU
Memory
Hard Disk
Video Controller
*1
Sound
Modem
LAN
*2
Wireless LAN
*3
Wireless WAN
*4
Bluetooth
*5
GPS
USB
IEEE 1394
PC Card Controller
SD Card Controller
Serial Port
Keyboard
Touch Pad
*6
Touchscreen
*7
Digitizer
*1
When the diagnostic utility is running, a loud beep will sound, so do not use headphones at this time. (The beep will
not sound if mute is using Windows.)
*2
Only for model with wireless LAN
*3
Only for model with wireless WAN
*4
Only for model with Bluetooth
*5
Only for model with GPS
*6
Only for model with touchscreen
*7
Only for model with digitizer. The display icon is "Touch Screen".
When the video diagnostic check is running, the display may be distorted, and when the audio diagnostic check is
running, sounds may be generated from the speaker. These are not malfunctions.
Regarding the PC-Diagnostic Utility
NOTE
For the hard disk and memory only, you can select standard diagnostic check or extended diagnostic check.
When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check.
We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using
the internal keyboard instead. Do not use the touchscreen or the digitizer.
Operations
Select icon
Click the icon
Complete the PC-Diagnos-
tics Utility and then restart
the computer
Touch pad operations
Place the cursor above the icon
Tap or click (right click cannot be used)
Click (close)
Internal keyboard operations
.
Press Space
and then press
( (close) cannot be selected)
Press Space above the icon
Press Ctrl + Alt + Del .
29