Component Identification - Graco GrindLazer 270 Operation

Component Identification

Component Identification
270 and 390 Models
D
C
B
A
D
C
B
A
480/630 Models
Component
A Engine Throttle Lever
B Engine Stop Switch
C Emergency Shut-Off
D Drum Adjustment Dial
E Drum Engage Lever
F Front Wheel Lock Lever
G Rear Wheel Parking Brake
H Drum Access Panel
K Depth Control Wheels
M Vacuum Port
N Lift Points
4
E
G
M
Adjusts engine speed.
Supplies power to Engine
Clamps onto the operator and shuts engine off if cord is disconnected during
operation.
Sets depth of drum cut.
When lever is engaged, handle bars can be pushed down to raise the cutting
drum off of surface and locked into UP position. Once drum is locked in UP
position, GrindLazer can be moved around without drum touching surface.
Front wheel is usually locked to guide GrindLazer in a straight line. When lever
is engaged, front wheel becomes unlocked and is allowed to turn freely.
Prevents rear wheel from moving.
Removable plate that allows access to replace cutting drum.
Levels cutting drum.
Port to attach vacuum to reduce dust and debris during operation.
Reinforced points used for lifting GrindLazer during transportaton or repair.
F
K
H
Description
N
ti14753a
3A0101F