White Rodgers 1F90W-71 Operation Manual page 27

VIEW
6. Press . The currently programmed
PRGM
start time and heating temperature for week-
day DAY will be displayed.
7. Repeat steps 3 through 5 to select the start
time and heating temperature for the week-
day DAY program.
8. Repeat steps 3 through 7 for the weekday
EVE and NHT heating programs.
9. After entering your weekday heating pro-
gram, repeat steps 1 through 8 for your
weekend programming (keep in mind that
for weekend programming, the display
should be changed from 5 DAY to 2 DAY).
10. When you have completed entering your
heating program, press
RUN
.
PRGM
Enter Cooling Program
CAUTION
!
If outside temperature is below 50 F, we
recommend that you remove the ther-
mostat from the wall before proceeding
with the following steps to program cool-
ing temperatures. Personal injury or
property damage may occur due to air
conditioner compressor slugging. Fresh
"AA" Energizer ® alkaline batteries must
be installed to perform off-wall program-
ming. Programming away from the wall
should prevent accidental compressor
operation. BE SURE SYSTEM SWITCH
IS SET TO OFF POSITION BEFORE RE-
ATTACHING THE THERMOSTAT TO THE
SUBBASE!
27