Summary of Contents for Fisher-Price XTREME MACHINE JR. 72664
Page 1
™ Model Number: 72664 Please save these instructions for future reference. Adult assembly is required. Tools needed for assembly: Cap Nut Assembly Tool (included), Phillips Screwdriver and Hammer (not included). Age Grade: 1 to 5 years. Weight Limit: 50 lb. (23 kg)
Page 2
WARNING CAUTION • Adult supervision is required. This product contains small parts. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pool areas Adult assembly is required. or other bodies of water. • Always wear shoes or sneakers. •...
Page 3
Assembly Inside Outside Cap Nut Assembly Tool Rear Wheel Cap Nut Bushing Barrel Side Front Axle B • Identify the outside surface of each wheel. (See the inset above to identify the inside surface of the rear [large] wheels. The inside surface of the front [small] wheels are marked IN.) •...
Page 4
Assembly Bushing Barrel Side Cap Nut Assembly Tool Rear Cap Nut Wheel "Hubcap" Side Hole B Bushing Front Axle B Plate Side • Lift the front end of the vehicle body and insert the long • Slide a bushing, plate side first, onto the rear axle. leg of front axle B up into the hole marked B in the •...
Page 5
Assembly Steering Wheel Steering Column Wheel “Hubcap” Side Bushing Cap Nut Plate Cap Nut Side Assembly Bushing Tool Barrel Side Rear View • Slide a bushing, plate side first, onto the end of the rear axle. • Slide a wheel, “hubcap” side out, onto the rear axle. •...
Page 6
Assembly Door Frame- Left Roll Cage - Rear Top Inner Door Frame- Outer Half Shock Lock Tab Slots Keyed Hole Tabs Long Tab Slot Left Side of • Angle the top inner door frame and fit the slots on the top Vehicle Body inner door frame onto the tabs on the outer door frame.
Page 7
Assembly #8 x 1 " #8 x " • From the passenger compartment, insert two #8 x 1 ” screws through the vehicle body and into the roll cage. • Tighten the screws with a Phillips screwdriver. Top Inside View Do not over-tighten.