Toolbar; Task Cards - Siemens FXS2061-O User Manual

GUI
3

Toolbar

3.3 Toolbar

3.4 Task cards

26 | 64
Building Technologies
Fire System
The commands on the toolbar enable the following functions:
The connection to '
Exchange of data with the '
Only those commands that correspond to the selected task card are displayed
on the toolbar. The commands available change if the task card is replaced.
Individual commands are hidden depending on which devices are connected.
Commands that cannot be executed are shaded gray.
Figure 5: Example of a toolbar
Task card: Network
Command
Discover Gateways ... Recognizes the radio gateways in range.
Disconnect
Get gateway device
list
or <F1>
Task card: Diagnostic function
Command
Discover devices ...
Disconnect
or <F1>
The menu structure and menu items are fixed for each task card. Individual menu
items may be shaded out depending on the task card selected. Menu items and
fields that can not be run are shaded gray.
The following task cards exist:
'Network'
'Diagnostic function'
Figure 6: Bar with task cards
Task card
Network
Diagnostic function
Network' or to ' Diagnostic function'
Network' or '
Action
Disconnects the active connection to the device.
Displays the list of available devices for the selected radio
gateway.
This document is displayed in PDF format.
Action
Recognizes the devices in range.
Disconnects the active connection to the device.
This document is displayed in PDF format.
Action
Read and configure 'Network'.
Read and configure 'Diagnostic function'.
Diagnostic function'
A6V10425605_b_en_--
2016-12-12