Download Print this page
H3C LSWM124TG2H User Manual
H3C LSWM124TG2H User Manual

H3C LSWM124TG2H User Manual

Interface card

Advertisement

Available languages

Available languages

Quick Links

Overview
The
LSWM124TG2H interface card provides 24 SFP28 ports and two QSFP28 ports.
LSWM124TG2H接口模块扩展卡对外提供24个SFP28口和2个QSFP28口
SFP28 port
SFP28口
Ports
You can install QSFP28 modules, QSFP28 cables, QSFP28 to SFP28 cables, QSFP+
modules, QSFP+ cables, and QSFP+ to SFP+ cables in the QSFP28 ports. QSFP28
口可选配QSFP28模块、QSFP28线缆、QSFP28 to SFP28电缆、QSFP+模块、QSFP+
线缆和QSFP+ to SFP+电缆。
You can install SFP28 modules, SFP28 cables, SFP+ modules, and SFP+ cables in
the SFP28 ports. SFP28口可选配SFP28模块、SFP28电缆、SFP+模块和SFP+线缆。
As a best practice, use H3C transceiver modules and cables for the QSFP28 ports
and SFP28 ports. 推荐您使用H3C公司的光模块和线缆。
The transceiver module and cable types supported by an interface card vary by
device model. For more information, see the installation guide or contact H3C
Support or marketing staff. 在具体产品上,接口模块扩展卡支持的光模块/线缆的种类
可能有所不同,若您需要准确的支持信息,请查询产品安装手册或咨询H3C公司市场
人员或技术支持人员。
For H3C transceiver modules and cables specifications, see H3C Transceiver Modules
User Guide at www.h3c.com.
光模块和线缆的具体规格,请您参见H3C网站发布的《H3C光模块手册》。
Ejector lever
Latch
扳手
锁闩
SFP28 port LED
SFP28口状态指示灯
QSFP28 port
QSFP28 port LED
QSFP28口
QSFP28口状态指示灯

Advertisement

loading

Summary of Contents for H3C LSWM124TG2H

  • Page 1 You can install SFP28 modules, SFP28 cables, SFP+ modules, and SFP+ cables in the SFP28 ports. SFP28口可选配SFP28模块、SFP28电缆、SFP+模块和SFP+线缆。 As a best practice, use H3C transceiver modules and cables for the QSFP28 ports and SFP28 ports. 推荐您使用H3C公司的光模块和线缆。 The transceiver module and cable types supported by an interface card vary by device model.
  • Page 2 Transceiver modules available for the QSFP28 ports QSFP28 口支持的光模块 Central Modal Cable Max transmission wavelength Model Connector bandwidth specifications distance 中心波长 对外型号 接口连接器 模式带宽 接口线缆规格 最大传输距离 (MHz*km) (nm) QSFP28 transceiver modules QSFP28 光模块 Four lanes 四条通道: • 1294.53 to 1296.59 QSFP-100G- •...
  • Page 3 Transceiver modules available for the QSFP28 ports QSFP28 口支持的光模块 Central Modal Cable Max transmission wavelength Model Connector bandwidth specifications distance 中心波长 对外型号 接口连接器 模式带宽 接口线缆规格 最大传输距离 (MHz*km) (nm) Four lanes: 2000 75 m (246.06 ft) 四条通道: QSFP-100G- • SWDM4-MM 50/125µm MFF •...
  • Page 4 Cables available for the QSFP28 ports QSFP28 口支持的线缆 Model 对外型号 Cable length 线缆长度 Data rate 传输速率 Cable type 线缆类型 QSFP28 to SFP28 cables QSFP28 to SFP28 线缆 QSFP-100G-4SFP-25G-CAB- QSFP28 to SFP28 1 m (3.28 ft) copper cable 100 Gbps QSFP28 to SFP28电 QSFP-100G-4SFP-25G-CAB- 3 m (9.84 ft) 缆...
  • Page 5 Transceiver modules available for the SFP28 ports SFP28 口支持的光模块 Modal Central Cable Max transmission bandwidth Model Connector wavelength specifications distance 对外型号 接口连接器 模式带宽 中心波长 接口线缆规格 最大传输距离 (MHz*km) SFP+ transceiver modules SFP+光模块 2000 300 m (984.25 ft) 50/125µm MFF 82 m (269.03 ft) SFP-XG- SX-MM8 850 nm...
  • Page 6 QSFP28 port LED QSFP28 口状态指示灯 LED Status 指示灯状态 Description 指示灯含义 Flashing green The port is sending or receiving data at 100 Gbps. 端口工作在100G模式下, 正在接收或发送数据 绿色闪烁 A transceiver module is installed in the port. The port is operating at 10/25/40 Steady yellow Gbps, and a link is present on the port.
  • Page 7 ① Unpack the card. Press the latch on the card to release the ejector lever. 从包装袋中取出接口模块扩展卡,并按压锁闩使扳手弹出。 ② Insert the card slowly into the slot along the guide rails. 将接口模块扩展卡沿着插槽导轨水平缓慢地推进接口模块扩展卡插槽。 ③ Rotate inward the ejector lever until the latch locks the ejector lever in place. 将扳手用力向内扣合,此时锁闩自动卡住扳手。...
  • Page 8 ① Press the latch on the card to release the ejector lever. 按压接口模块扩展卡上的锁闩使扳手弹出。 ② Hold the ejector lever to pull the card outward until the card is disconnected from the connectors.拉动扳手使接口模块扩展卡与设备内连接器端子脱离。 ③ Hold the card with both hands and take it out slowly. 用双手水平缓慢地取出接口模块扩展卡。...