Introduction - McCulloch ROB S400 Operator's Manual

1.1 Introduction

Serial number:
PIN code:
Product registration key:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.mcculloch.com.
1.1.1 Support
For support about the product, speak to your
servicing dealer.
1.1.2 Product description
Note: regularly updates the appearance and
function of the products. Refer to
page 3 .
The product is a robotic lawn mower. The product
has a battery power source and cuts the grass
automatically. It continuously alternates between
mowing and charging. The movement pattern is
random, which means that the lawn is mowed
evenly and with less wear. The boundary wire
and the guide wire controls the movement of the
product within the work area. Sensors in the
product senses when it is approaching the
boundary wire. The front of the product always
passes the boundary wire by a specific distance
before the product turns around. When the
product hits an obstacle or approaches the
boundary wire the product selects a new
direction.
1411 - 001 - 18.12.2019
1 Introduction
The operator selects the operation settings with
the keys on the keypad. The display shows the
selected and possible operation settings, and the
operation mode of the product.
1.1.2.1 Mowing technique
Support on
The product is emission free, easy to use and
saves energy. The frequent cutting technique
improves the grass quality and decreases the
use of fertilizers. Collection of grass is not
necessary.
1.1.2.2 Find the charging station
The product operates until the battery is low.
Then it follows the guide wire to the charging
station. The guide wire is laid from the charging
station towards, for instance, a remote part of the
work area or through a narrow passage. The
guide wire is connected with the boundary wire
and makes it much easier and faster for the
product to find the charging station.
Introduction - 3