Dryer Operating; Starting Your Dryer - Whirlpool Thin Twin LT5004XS Use & Care Manual

Dryer Operating Instructions
The drawings in this book may vary slightly from your dryer model. They are
designed to show the different features of all the models covered by this book.
NOTE: Your model may not include all the features shown.
Starting your dryer
Before starting your dryer, be sure laundry is sorted and loaded properly. Make sure
1. Select a cycle and time by turning
the Cycle Control Knob either way to
point to the cycle and time setting
you want.
2. Push the Start Button to Start the
set drying cycle and time settings.
3. To stop and restart the dryer:
l
Open the door or turn the Cycle
Control Knob to an OFF area to stop
the dryer.
l
Close the door and push the Start
Button to restart the dryer.
4. To change the setting at any time,
turn the Cycle Control Knob either
way to point to a new time setting.
The Cycle Control Knob should point
to an OFF area when the dryer is not in
use. If the dryer is stopped before the
cycle is finished, turn the Cycle Control
Knob to an OFF area.