Starting Your Washer - Whirlpool LA68OOXP Use & Care Manual

Starting your washer
Before starting e I. Measure and add detergent.
your washer:
I
2. Place sorted load in washer.
3. Star-t washer.
Select a Select WATER
1. LOAD SIZE
2.
TEMPERATURES
l
To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET
l
Then turn the knob to point at a
setting that describes the size of the
load you want to wash.
l
Set the knob anywhere on or be-
tween HAND WASHABLE (a few small
items) and EX LARGE (a full load).
See your "Laundry Guide" for details
on load sizes.
l
Select wash and rinse water tem-
peratures by pushing a button.
. This drawing shows a warm wash
(top temperature) and cold rinse
[bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide".
j.,_ . .
,
..~. -
; LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
!
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
0
DO NOT
OVERLOAD WASHER.
'Approximate
fill with load.
-:. EX-LARGE (20.5 gals./77.6 L)'
.-, MEDIUM (13.9 gals.152.6 L)'
HAND WASHABLE (7.8 gals.129.5 L)'
/
q
4