Whirlpool 3360462 Use And Care Manual page 9

What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
points to OFF and the cycle ends.
The washer pauses briefly throughout
each cycle.
These pauses are normal for
washer-operation.
Regular and Short cycles
to selected load size
Wash selected time
Drain-No agitation
w
Spin
Fill
Drain-No agitation
Spin-Spray rinse
Spin
Inl
Permanent Press cycle
Fill to selected load size
v
Wash selected time
v
tz4
-+- Partial drain-No agitation
Fill to selected load size
Brief agitation
Drain-No agitation
I-J &t
Spin
Fill
Rinse
Drain-No agitation
IXJ
Spin-Spray rinse
EJ
Spin
w
Off
v
9