Whirlpool W10306121A Use And Care Manual page 10

7, Select cycle
pefm press
CASUAL
TOWELS
SHEETS
hondwash
DELICATE
NORMAL
d_rks
COLORS
BULKYITEMS
HEAVYDUTY
WHITES
QUICKWASF
RINSE CLEAN
DRAIN SOAK WASHER
& SPIN
with i_'_
Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose DELAY
WASH option.
To choose a delay time:
1. Press START/PAUSE.
2. Press DELAY WASH button
to select desired delay time.
3. Press START/PAUSE.
Est. Time Remaining
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
8. Select cycle settings
Heavy Hot/Cold
Normal High Warm/Warm
Medium Medium Warm/Cold
L ght Low Co d/Co d
Soil
Level
Spin Wash/Rinse
Speed Temp
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash/Rinse Temperature, if desired. Not all
settings are available with all cycles.
Always read and follow fabric care labels instructions
to avoid damage to your garments.
Hot
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable garments
your hot water heater setting.
!i Heaw soils
:::Warm
Some cold water will be added, so Bright colors
this may be cooler than what your Moderate to light soils
previous washer provided.
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
10