Graco A Series Repair Manual page 12

Service
B) For all QuikPak Throat Repair Kits (provided
pre-soaked in oil).
14. Remove packings and glands from piston rod.
Not used on
16Y598,
17H828
15. A) For all non-QuikPak Repair Kits.
Soak all leather packings in SAE 30W oil for one hour
minimum prior to assembly. Stack male gland (219)
on piston rod. Alternately stack UHMWPE (208)and
leather (218) packings (note orientation) on piston
rod. Install female gland (217). Install piston wiper
(216) and backup washer (229) (note orientation) on
piston valve (210). The special sealing patch on
12
piston valve threads is good for four repackings. Use
thread sealant on piston valve threads after four
repackings.
Not
used on
16Y598,
17H828
B) For all QuikPak Piston Repair Kits (provided
pre-soaked in oil).
ti3939a
16. Install ball (206) in piston rod.
If thread sealant is applied to piston valve threads, make
sure none gets on ball. Install piston valve on piston rod.
Torque as follows:
16Y598, 17H828
16Y706, 17H830,
17H829
16X423, 17H831,
25E689
219
218
Models
27 ± 3 ft-lb (36.6 ± 4.1 N•m)
55 ± 3 ft-lb (74.6 ± 4.1 N•m)
100 ± 5 ft-lb (136 ± 7 N•m)
217
216
229
206
210
208
ti3941a
Torque
3A6584A