Whirlpool LBR4132HQ0 Use & Care Manual page 9

S
ELECTING A CYCLE AND TIME
(One-speed models)
Normal Cycle
The Normal cycle features high-speed agitation for
maximum cleaning, and high-speed spin to shorten
drying time. Select up to 14 minutes of wash time to
clean large loads of sturdily constructed fabrics that
are heavily soiled. Select less wash time to clean
washable knits, cottons, permanent press, and some
synthetic fabrics that are lightly to moderately soiled.
Super Wash Cycle
Select the 18-minute Super Wash feature to wash
heavily soiled loads that need maximum soil removal.
Use two times the recommended amount of detergent
for this cycle.
Permanent Press Cycle
The Permanent Press cycle features a cool-down
rinse to minimize wrinkling of permanent press blends
and synthetic fabrics. Select 6 to10 minutes of wash
time to clean lightly to moderately soiled loads.
Cycle options
(
models without a separate Water Temperature selector)
You may select different wash time and water tem-
perature combinations by first selecting the Water
Temperature and then turning to the new wash time.
For example, for 14 minutes of wash time in the
Normal cycle with Cold water:
1. Push in the Cycle Control knob, and turn it clock-
wise to the Cold setting.
2. Pull out the Cycle Control knob and allow washer
to fill.
.
( CONT )
Delicates Cycle
The Delicates cycle features brief agitation and soak
periods, followed by shorter spins. Use this 6-minute
cycle to clean delicate items and washable knits that
are lightly or moderately soiled.
Soak Cycle
The Soak Cycle features brief periods of agitation
and soak time to remove heavy soils and stains that
need pretreatment. Use warm water when soaking
laundry. Hot water can set stains. Use the amount
of detergent or presoak additive recommended by
the manufacturer. When the Soak cycle ends, add
detergent and start a new wash cycle.
Pre-Wash Cycle
The 4-minute Pre-Wash cycle features a brief period
of agitation to help remove heavy soils and stains
that need pretreatment. When the Pre-Wash cycle
ends, add detergent and start a new wash cycle.
3. When washer has filled, push in and turn the
Cycle Control knob to 14 minutes of wash time.
4. Pull out the Cycle Control knob to start washer.
USING YOUR WASHER
9