Advertisement
Starting/stopping
the washer
l
Start the washer by pulling out the Cycle
Control Knob. The washer will fill to the
selected water level with the selected wash
water temperature.
The washer will begin
agitating immediatefy
after filling. Agitation can
occur with the washer lid up or down.
l
To stop the washer at any time, push in the
.Cycle Control Knob. To restart the washer, pull
out the Cycle Control Knob.
What
happens
in each
cycle
Each cycle is designed for different kinds of
fabrics.
When the Cycle Control Knob is set to a
number and pulled out, the washer fills before
agitation and timing starts. After agitation starts,
the knob turns clockwise until it points to OFF
and the cycle ends.
The washer pauses briefly throughout
each
cycle. These pauses are normal for washer
operation.
6
Advertisement
