Using Your Washer - Whirlpool 2LA5700XK Use And Care Manual

Using your Washer
Your automatic washer is easy to
use. To make it even easier, read the
following steps before starting your first
load.
Start your washer after you put In
detergent, the load, and any other
laundry aids according to informatlon
on page 3 and page 6
1.
Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the size of the load. See page 5 for
more Information
l
To change the setting on the
LOAD
SIZE SELECTOR,
first move It to RESET.
Then move It back to the setting you
want
IMPORTANT: For the best cleaning
results with the least wrlnkllng, make
sure the load has enough water for
2. Set the TEMPERATURE SELECTOR.
l
Match the wash and rinse water tem-
peratures to the type of fabrics and SOIIS
being washed See the InstructIons
under the washer IId and on page 14 in
your Laundry Gu/de
l
Be sure to use a cold rtnse for PERMA-
NENT PRESS and KNITS GENTLE Cvcles
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn it to the right (clockwise)
l
Stop when the pointer is on the numb
ber of minutes of washing you want
In the cycle you want.
l
lnstructlons for which cycles to use for
each fabric type are under the Ild.
l
To start the washer, pull the Cycle
Control Knob out When the cycle
IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
Pull it out to restart the washer.
l
To change a setting,
push the Con-
trol Knob In to stop the washer Then turn
the Control Knob to the right (clockwlse)
to the setting you want. Pull the knob
out to start the washer
l
Pages R-II show what happens in
each cycle