Dimplex DHEBUS Instructions Manual

Dimplex DHEBUS Instructions Manual

Fitted polyester detachable 12 hour auto off controller

Advertisement

Quick Links

ELECTRIC BLANKET
Detachable 12 hour Auto Off
Note: The specifications and/or components of this product are subject to change without prior notice
www.reductionrevolution.com.au/heating-cooling
INSTRUCTIONS
Fitted Polyester
Controller
Model Numbers
DHEBUS
DHEBUQ
DHEBUK
Order Online From:
Reduction Revolution Pty Ltd
Single
Queen
King

Advertisement

Table of Contents
loading

Summary of Contents for Dimplex DHEBUS

  • Page 1 ELECTRIC BLANKET INSTRUCTIONS Fitted Polyester Detachable 12 hour Auto Off Controller Model Numbers DHEBUS Single DHEBUQ Queen DHEBUK King Note: The specifications and/or components of this product are subject to change without prior notice Order Online From: Reduction Revolution Pty Ltd...
  • Page 2: Table Of Contents

    IMPORTANT SAFEGUARDS ............... 3 Connecting the Controller ..............5 Securing Your Electric Blanket ............6 Using The Controller ................7 Electrical Field Effect ..................7 Auto Off......................8 Pre Heat ......................8 Overheat / Element Protection ............8 Recommended Cleaning Instructions ..........9 Treatment For Localised Soiling ...............
  • Page 3: Important Safeguards

    Thank you for purchasing our Electric Blanket. Each unit is manufactured to ensure safety and reliability. Before using for the first time, please read the instruction manual carefully and keep it for future reference. 1 IMPORTANT SAFEGUARDS • Before connecting and switching on the blanket, ensure that the voltage indicated on the rating label corresponds to the mains voltage in your home.
  • Page 4 • Do Not Allow Pets or Animals To Lie or Chew On This Product or On The Electrical Cords Etc. • Prolonged application at the highest heat setting can result in skin burns. • Do not tuck the edges of the blanket in. •...
  • Page 5: Connecting The Controller

    • Only use the controllers supplied with this blanket. • For additional protection, it is strongly recommend that the use of a residual current device (RCD) with a tripping current not exceeding 30mA be used on the circuit supplying this product. If you are unsure if your home has this device, please contact your nearest Electrical Contractor.
  • Page 6: Securing Your Electric Blanket

    3 Securing Your Electric Blanket Note: Your electric blanket must be placed directly onto the mattress. If using a mattress protector, this goes over the electric blanket. IMPORTANT: • Place the blanket onto the mattress with the Head controller connection/s at the HEAD END of the bed. NOTE: Electric blankets MUST NOT be used on top of the user (as with a normal blanket), instead they must be firmly secured to the mattress.
  • Page 7: Using The Controller

    4 Using The Controller • Use your Electric Blanket with Detachable Controller Model MC-102A Only. • Do not use any other controller for this blanket. Heat Level 0 = Off 1 = Low Heat (Suitable for all night use) 2 = Medium Heat 3 = High Heat (For preheating the bed only) 0 = Off Temperature...
  • Page 8: Auto Off

    4.2 Auto Off This controller is fitted with a 12 hour Count Down Auto Off Timer which starts to countdown from when your heat setting has been selected, and will switch power off to the elements after approximately 12 hours. (+/- 30Minutes). Note: Once a heat setting has been selected and the switch is powered ON, the countdown timer will not be affected by adjusting heat level.
  • Page 9: Recommended Cleaning Instructions

    • Should this occur, the Blanket and Front Heat Level display lights will turn off and a RED indicator light will illuminate through the back of the controller. This indicates that the Blanket and controller needs to be replaced and cannot be repaired. If in a bright room, you may need to cup your hands around the back of the controller to make it darker so that the RED indicator light can be seen.
  • Page 10: Treatment For Localised Soiling

    6.1 Treatment For Localised Soiling Never Use Hot Water as the blanket may shrink and will void your warranty. The area affected should be sponged gently using a natural wool detergent or mild soap flakes dissolved in lukewarm water (30°C Max), followed by two consecutive spongings using clean, soap-free lukewarm water.
  • Page 11: Drying

    6.4 Drying • Spread the blanket out on a clean surface (e.g. a large table) to dry in a shady area. • Your blanket can also be dried on a clothes line provided the blanket is not creased or folded. •...
  • Page 12: Troubleshooting

    9 Troubleshooting 9.1 Testing Controllers. Before contacting the service department please follow the steps below to determine if there is actually a fault, and if so, if a fault is within the blanket or within the controller. This will make it easier when talking to the service department.
  • Page 13: Troubleshooting Table

    9.2 Troubleshooting Table Problem Cause Remedy No Power to Slide the knob to setting 1, 2 or 3. The corresponding The Temperature Slide Knob is in the “O” position Controller / No front display Lights should illuminate. Heat Level Indicator Lights The Power Plug may not be plugged in to the power Ensure the power plug is inserted into the power showing on Front...
  • Page 14: Warranty

    10 Warranty This warranty is provided by Glen Dimplex Australia Pty Limited ABN 69 118 275 460 of Unit 1, 21 Lionel Road, Mount Waverley, Victoria 3149 (Phone number 1300 556 816), or in New Zealand by Glen Dimplex Australasia Limited, New Zealand registration...
  • Page 15 If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the Dimplex product or replace the Dimplex product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible).
  • Page 16 Where you make a claim under this warranty, a Dimplex authorised repairer may need to attend your premises to inspect the Dimplex product. If the Dimplex product is located in Australia, we may charge you a service call fee if a repairer will be required to travel more than 30 kilometers from the place of purchase.

This manual is also suitable for:

DhebuqDhebuk

Table of Contents