Error Message - Braun BFH175 Manual

Errors and troubleshooting (cont.)

Error message

Situation
When ambient temperature is
too high or too low to take an
accurate reading, device will
provide an "Err" message. The
error message will appear after
start up and memory recall.
Low battery
When 20% of battery life is left,
the display FLASHES the low
battery warning symbol, however,
the device can still work until the
battery life has 0% left.
Dead battery indication
If the steady battery icon is the
only symbol shown on the
display, the device can not work.
Blank display
Thermometer does not have
power.
All segements flashing
System error-self-check display
flashes continuously and will not
be followed by the ready beep
and the ready symbol.
If error persists,
If error still persists,
Solution
When you receive this symbol,
press the power button to reset
the thermometer before taking
a new measurement. If the
ambient temperature is not
within the allowed range of 59°-
104°F or 15°- 40°C, you will not
be able to take a reading.
See "Replacing the batteries"
for instructions.
See "Replacing the batteries"
for instructions.
Please check if the batteries
have been loaded correctly.
Also check polarity (<+> and
<–>) of batteries.
Wait 1 minute until the
thermometer turns off
automatically, then turn on
again.
....reset the thermometer by
re-moving the batteries and
putting them back in.
...please contact
consumer relations.
11