Marquis 420 Sport Coupe Owner's Manual page 45

AC E S
lECtriCAl yStEm
Shore Power Connection
Shore Power access door.
Located at Starboard Aft
(shown with Cablemaster deployed)
Shore Power Cable
and switch
External Cord -
Secure the nonmetallic threaded locking ring that locks each cord to the
boat's shore power receptacle. This prevents the cord from being accidentally
disconnected and from arcing due to a gap between the cord plug and the
receptacle.
Do not allow the end of the shore power cord to hang in the water. This can cause an
electrical field to form which can kill or seriously injury to nearby swimmers or
passengers.
Cablemaster -
switch, pay out cord as needed.
External Cord and Cablemaster -
Cablemaster
Junction Box
Circuit Breakers
3837 • U3 10/07
Locate your 50' shore power cord and connect the female
end of the cord to the boat's shore power receptacle.
Unthread and move access cap out of the way. Using the
in the source box at the shore power station to OFF.
Plug the male end of the shore power cord into the shore power
source outlet.
Secure the nonmetallic threaded locking ring that locks cord to
the shore power source outlet. This prevents the cord from being
accidentally disconnected and from arcing due to a gap between the
cord plug and the outlet
Switch the circuit breaker that is installed in the shore power source
box ON.
Switch the AC Main circuit breaker group ON (AC Panel - Salon).
Green indicator light should be ON. If not recheck all connections and
check circuit breakers on Starboard aft bulkhead near Cablemaster.
Monitor voltmeter and ammeter while connected to shore power.
https://www.boat-manuals.com/
Switch the circuit breaker that is installed
.
S 3
ECtion
Shore Water
Connection
3