Panasonic ES‑ST2N Operating Instructions Manual page 17

Problem
Shaver does not operate
even after charging.
The driving sound
changes while shaving.
Makes a loud sound.
The odor is getting
stronger.
ES-ST2N_US.indb 17
Action
Use the appliance in an ambient
temperature approximately 5 °C
(41 °F) or higher.
The battery has reached the end
of its life.
The shaver will not operate with
the AC adaptor connected. Please
use the shaver after it has been
sufficiently charged and the AC
adaptor disconnected.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑pitched
sound due to the linear motor drive.
This does not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
This can be improved by cleaning
every time after shaving.
Problem
When the shaver is very dirty, first
The shaver cannot be use the cleaning brush to remove
properly cleaned even beard trimmings.
after water is poured from Or, remove the foil frame and
the water inlet. wash with water.
(See page 13.)
This can be improved by cleaning
every time after shaving.
Clean the inner blades with the
Shavings fly out in all
brush when shavings are
directions.
adhering to the inner blades.
Confirm that the cleaning shutter
is firmly closed.
Apply oil.
Replace the system outer foil if it
System outer foil gets hot.
is damaged or deformed.
(See page 15.)
Apply oil.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
You do not get as close a
shave as before. Expected life of system outer foil
and inner blades:
System outer foil:
Inner blades:
Action
Approximately 1 year
Approximately 2 years
17
2016/06/09 14:23:04