Whirlpool ETl8MK Use And Care Manual page 6

2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
Moving the meat pan and cover...
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan
first.
TO
STOP,
LIFT THE
AND PULL AGAIN
HEAVY.
UL.
Adjusting the refrigerator shelves.,.
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items,
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
.,.
* ,r.i,?...__"
lllc -s-a .-.--~l.--
To remove the meat pan and cover:
1.
Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
To replace the meat pan and cover:
1.
Guide the rear hooks of cover into the slots in the
shelf supports.
2. Tilt up front of cover until rear hooks drop into
slots. Lower front of cover to level position.
3. Replace meat pan in reverse order of removal.
I . ,. r . ..vr . +a s,. ,.-7mm.
To remove glass shelves:
1.
Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1.
Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing crispers and crisper cover...
PULL OUT TO STOP. LlFl THE FRONT
ND PULL AGAIN
6
REMOVE THE
GLASS INSERT,
Lln THE FRAME FRONT,
THEN THE BACK.
GLASS IS HEAVY.
BE CAREFUL.
To
1.
2.
To
1.
2.
3.
To
1.
2.
3.
remove the crispers:
Slide crisper straight out to stop, lifl front, then
slide the rest of the way out.
Replace in the reverse order.
remove the cover:
Push up glass insert from bottom, then slide out
with both hands.
Lift front of cover frame.
Lift out cover frame by pulling up and out.
replace the cover:
Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
Replace cover support with the long tab to-
wards the front.
NOTE:
If the support needs ad-
justment, turn base right to raise, or left to lower.
Slide back of glass insert into place, then lower
front.