SP1425
Cleaning the ADF (with Cleaning Paper)
The ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1.
As the scanner continues to feed the documents, paper dust will accumulate inside the ADF
and may cause scanning errors.
Cleaning should be performed approximately every 3,000 sheets scanned. Note that this
guideline varies depending on the types of documents you scan For instance, it may be
necessary to clean the scanner more frequently when you scan documents on which the toner
is not sufficiently fused.
Attention
• Do not use water or mild detergent to clean the ADF.
• It may take a long time to dry if an excessive amount of Cleaner F1 is used. Use it in
small quantity.
1. Turn on the scanner
2. Spray the Cleaning Paper with Cleaner F1.
3. Lift up the stopper
4. Load the Cleaning Paper in the ADF paper chute (feeder).
C
R
ONSUMABLE
EPLACEMENT AND
Cleaning the Inside
C
I
LEANING
NSTRUCTIONS
CG00002 ‐ 295501