Nokia FastMile Installation Manual page 26

ANSI safety guidelines
4.4 ESD safety guidelines
The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened.
Operations personnel must observe the following ESD instructions when they handle
the Nokia FastMile 4G Receiver equipment.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
4.5 Environmental requirements
See the Nokia FastMile 4G Receiver Product Overview for information about
temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia
FastMile 4G Receiver specifications.
During operation in the supported temperature range, condensation inside the Nokia
FastMile 4G Receiver equipment caused by humidity is not an issue because the
Nokia FastMile 4G Receiver is a sealed unit.
34
This equipment is ESD sensitive if opened. Proper
Caution —
ESD protections should be used if you open the Nokia FastMile
4G Receiver.
3TG-00387-AADA-TCZZA
Nokia FastMile 4G Receiver Installation Guide
Issue: 02 DRAFT