Changing The Control Settings; Adjusting; The Door Bins - Whirlpool ET25DM Use And Care Manual

Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide. If you have questions, call our
Consumer Assistance Center number. (See
page 21.)
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION: REASON:
If Refrigerator Door opened often
Section is Large amount of food added
TOO WARM Room temberature too warm
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
Freezer
L
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Controls not set correctly
for your conditions
Refrigerator
Freezer
:
Refrigerator 2
Freezer
A
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Refrigerator 4
Freezer A
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 6
Freezer
C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.