Table of Contents
Advertisement
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
To remove glass shelves:
to hold botttes, milk and other heavy food items.
1.
Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace
glass shelves:
1. Guide the rear hooks inio the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing and adjusting the freezer shelf...
To remove the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf:
1. Remove shelf.
2. Remove supports by sliding upwards.
3. Replace supports on desired level.
4. Replace shelf.
SHELF SUPPORT
Removing crispers and crisper cover...
PULL OUT 10 STOP, LIFT THE FRONT
AND PULL AGAIN
REMOVE THE
LIFT
THE FRAME
THEN THE
BACK
GLASS IS HEAVY.
BE CAREFUL.
To remove the crispers:
1. Slide crisper straight out to stop, liff front, then
slide the rest of the way out.
2. Replace in the reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To replace
the cover:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fit back of corner into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
Moving the meat pan and cover...
PULL OUT TO STOP. LIFT THE
FRONT AND PULL AGAIN.
AVY.
To remove the meat pan:
1. Slide the meat pan out to stop.
2. Lift the front.
%3. Slide the pan the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1.
Tilt
front of cover up, lift at back, and pull straight
0U-t.
2. Replace in reverse order.
6
Advertisement
Table of Contents
