Nanfone NF-910 User Manual

Table of Contents

Quick Links

Download this manual

CONTENTS

Introduction.....................................................................................................................01

Included..........................................................................................................................01

Main Features..................................................................................................................02

Technical Information.......................................................................................................03

Know the Radio...............................................................................................................05

Preparation before using.................................................................................................06

Basic Functions.................................................................................................................11

Function Setting...................................................................................................................15

Care& Maintenance..........................................................................................................19

Trouble Shooting ............................................................................................................20

Appendix: CTCSS and DCS chart.......................................................................................21

Warranty Card........................................................................................................22

Table of Contents

Summary of Contents for Nanfone NF-910

Page 1: Table Of Contents
CONTENTS Introduction…………………………............…….…..……….01 Included………………………………..…............……...…..……..01 Main Features………………………………..…............……...…..02 Technical Information…………………………............…….…...03 Know the Radio………………………………..…............……...…..05 Preparation before using………………………………..…............06 Basic Functions………………………................……..11 Function Setting………................…..…..……..15 Care& Maintenance…………………..........………..…..…..….19 Trouble Shooting ……………………………..........…..…..…..…...20 Appendix: CTCSS and DCS chart……………............…..…..21 Warranty Card……………………………………………………………………………..………...22...
Page 2: Introduction
Introduction Thanks for purchasing NANFONE transceiver NF-910.Please read this manual carefully to learn its latest functions and operations before using. NF-910 is with mini compact size, easy to use feature and stable performance, which is developed for satisfying customers demand.
Page 3: Main Features
Description Unit Quantity Antenna Belt clip Lithium battery pack Power adapter Desktop charger QC passed card User manual （warranty card） Main Features: 1.Frequency range: 400MHz-470MHz 2.Voice reported in both English and Chinese(optional). 3.High/Low Power 4.Wide/Narrow Bandwidth: 25K/12.5K selective. 5.CTCSS 50/ DCS 83 is to avoid interference from other radios. 6.VOX Function.
Page 4: Technical Information
9.Scan Function. San and receive all the conversation channel. 10.FM Radio . Know more about latest news. 11.Battery Save and Long Standby. All the above functions can be programmed by PC. In addition, it has the below functions: 1.SQL Setting. Eliminate background noise when conversation is ended. 2.BCL Function.
Page 5 Transmitting Frequency distortion: ±3ppm Power output: ≥5W Emission current ≤2.3A Maximum deviation: ≤±5kHz or ≤±2.5kHz selectable Audio frequency distortion: <5% Adjacent frequency: <60dB Residual radiation <-60dB Receiving Receiving sensitivity: <-122 dbm (12dB SINAD) Squelch sensitivity: <-122 dbm Audio output power: ≥500mW Receiving current: ≤500mA...
Page 6: Know The Radio
Know the radio 1. Antenna 2. Knob channel 3 .Knob volume 4. PTT 5. Monitor 6. Microphone 7. Speaker 8. MIC 9. Battery pack 10. Indicator 11. Belt Clip...
Page 7: Preparation Before Using
Preparation Before Using Install the Antenna Install the antenna as picture shows and rotate it clockwise till tight. (antenna appearance is for reference only) Note: Don’t hold the antenna or hang the keys or external MIC on the Antenna ,in case of destroying the performance of radio .
Page 8 Install the battery Install the battery along the rear case of radio properly. as following pictures show： Disassembling of battery Press the fixed buckle of the battery(P1),then push down the battery off the transceiver(P2)
Page 9 Install and take off the belt clip If necessary ,fix the belt clip with two screws (3*6) as picture shows: Note: 1. When installing the belt clip , do not use any glue to fix screws, otherwise, it will damage the housing.
Page 10 Install external microphone Install the microphone as picture shows, plug the headset into the directly jack and press on. Charging The battery pack is not fully charged , and please charge it before using. When used for the first time after purchased or stored over two months, the capacity of battery pack is less than normal.
Page 11 Note: 1.Please make sure the battery connect with the touching piece of the charging terminal. 2. Green light indicates power on or the battery is full. Red light indicates the charging just beginning. Charge in power-off mode, the indicate red light is on, and it is off when finish charging. 3.
Page 12: Basic Functions
Basic Functions Power on Turn the power switch clockwise/volume control knob to turn on the radio. The sound "beep", if the voice function turning on, and reports the current channel number. Channel Selection Switch the channel rotator to the demanded channel .If turning on channel report (programmed by PC) ,then hear the channel No.
Page 13 SK1 or Keys SK2 .Stop scanning when get a signal If want to receive another radios, short press (FM/Monitor/FM+) or Keys SK2 again. 2. Long press (FM/Monitor/FM+) for more than 2 seconds and hear the sound” beep ,beep” means to quit the FM. 3.
Page 14 Channel Lock Out Radio with channel lock out function avoids not transmitting by some improper operation on the radio at some specific occasions. Steps: Press Keys SK1(FM/Monitor/FM +) and Key SK2(FM-) at the same time to turn the radio on , and “beep”...
Page 15 release the button. 3. When the orange light on the base transceiver flashes, press the PTT key, the green light on base transceiver flashes, and the red light on subsidiary transceiver flashes, which indicates the base transceiver is in cloning state. The mutual clone is successful when the light on base transceiver flashes orange again.
Page 16: Function Setting
Function Setting PC Software Programming Setting Please login in http://www.nanfone.com to download to NF-910 software. Or ask for the local distributors. SQL Setting 1. Open the PC software to select the squelch level you require on the right corner Squelch level is from 1-9. The higher the squelch level, the lower chance of interference, but it may affect the communication distance.
Page 17 1. Open the PC software programming to select the times . The purpose of the Time-out Timer is to prevent any single person from using a channel for an extended period of time. 2. The overtime can be set by PC software programming ( the time can set as 30 seconds, 60 seconds, 90 seconds、120 seconds、150 seconds、180 seconds or OFF ).
Page 18 10 seconds after the interference, which is normal. Busy Channel Lockout 1. Open the PC software to select the channel you require. NF-910 can be set to be OFF, carrier wave and QT/DQT busy lockout 2. CTCSS Busy Lockout: The transceiver receives SQ, but not QT/DQT, and then transmitting is allowed.
Page 19 FM Radio Open the PC software to decide whether you will select the FM radio or not. When ”on” is chosen, that means you the function being turned on. Radio Return Open the PC software to decide whether you will select the Radio return function or not. When ”on”...
Page 20: Care& Maintenance
Care &Maintenance Transceiver you purchased is an exactitude design electronic products and please use it carefully. Following maintenance ways may help extend its lifetime. 1. Please don’t try to disassemble the transceiver since non-technicians’ processing may cause damage to the device. 2.
Page 21: Trouble Shooting
Appendix: CTCSS and DCS chart Trouble Solution ●The battery pack may have been exhausted. Please replace a new battery or recharge No reaction when power-on the battery. ● The battery pack may be not installed correctly. Please check and install it again. ●...
Page 22: Appendix: Ctcss And Dcs Chart
Appendix: CTCSS and DCS chart...
Page 24 NF-910 www.nanfone.com User Manual...