Advertisement
PLAYING MUSIC
1. Press and hold
2. Short press
3. Short press
4. Short press
5. Short press
6. Press and hold
WIRELESS BT PAIRING AND CONNECTION
1. Connect BT controller box to your device.
2. Press and Hold
3. The system will automatically go into pairing mode. The power indicator
turns blue, the BT indicator will turn blue and blinks while wating for BT
connection. Please be sure that your device BT is turned ON. Select
"PYLEUSA" on your device to connect BT controller (if the BT controller is
connected the light will turn blue and not ash).
4. When the device is out of BT range, BT will be disconnected automatically
and automatically reconnected when detected in range again.
(If not please just repeat steps 1 and 2)
5. Input mode indicator ---Blue light for BT, red light for AUX In, and purple
light for USB.
WIRELESS BT INSTALLATION
Seamless Flush Mount
Size:
• 96mm (Out Diameter)
• 76mm (Cutout Diameter)
• 93mm (Depth)
for 3 seconds to Power ON or OFF.
to play music or pause.
to switch BT mode/Aux-in mode/USB mode.
/+ for next track, press and hold
/- for previous track, press and hold
to disconnect BT.
for three seconds until power indicator lights (blue).
/+ for volume up.
/- for volume down.
www.PyleUSA.com
3
Advertisement
