Table of Contents
Advertisement
unplugthe
retrlgerator
or disconnect
the
electrlclty
leading
to the
re-
frlgerator
at the main power
supply.
Shock
and injury
can occur
if elec-
tricity
remains
connected.
I, Reach behind control console to find bulb
2. Remove bulb.
3. Replace
with a 40-w&
appliance
bulb.
Moving the meat pan and cover...
The meat
pan and cover
can be removed
for
cleanrng
and moved
to another
shelf. If desrred
Remove the meat pan first.
Changing
the light bulb...
WARNING:
Before removlng
the light bulb, either
Removing:
1. Slide thepan
out to stop
2. Lrft the front of meat pan
3 Slide pan the rest of the way out
4 Tilt cover up at front
5 Pull forward
and out
Replacing:
1. Fit notches underneath
cover over rear and center
cross bars on shelf.
2. Lower cover in place.
3. Replace
meat pan in reverse order
Adjusting the refrigerator
shelves...
1 Frrst. remove food from shelf
2. Slrde shelf strarght out to stop
3. Lift front.
4 Slide the rest of the way out
Replacing
Shelt:
1 Fit back of shelf on top of guides wrth wire stops
on the bottom
of gurdes
2 Lift front, slide shelf in untrl It clears guide stops
Shelf Guide
Removing crispers and crisper cover.. .
Removing
the Crispers:
1 Slide crrsper straight out to stop, I~ft front, then slide
the rest of the way out.
2 Replace
in the reverse order.
Removing
Cover:
1 Lift front and remove the cover support
2 L~fl out cover by pulling up and out.
Replacing
Cover:
I. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place
2. Replace
cover support with the long tab towards ,
the front Note: If support needs adjustment.
base right to lower, or left to raise
turn
Removing and adjusting the freezer shelf...
To remove
shelf:
1. Lift front slightly
2. Lift back off supports.
3. Replace
in reverse order.
To adjust
shelf:
1. Remove shelf.
2. Remove supports by sliding upwards.
3. Replace
supports on desired level.
4. Replace
shelf.
6
Pull out to stop.
r'Lift
the Front and Pull Again.
Advertisement
Table of Contents
