Table of Contents
Advertisement
I--
Before Using Your
Refrigerator
In This Section
r
Page
Page
Cleaning your refrigerator . . . . . . . . . . . . . . . . . 5
installing it properly . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Plugging it in
5
Leveling it
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning
your refrigerator
Removing
packaging
materials
Remove tape and any inside labels (except
the model and serial number label) before
using the refrigerator.
To remove any remaining glue:
l
Rub briskly with your thumb to make a ball,
then remove.
OR
l
Soak area with liquid hand-dishwashing
detergent before removing glue as de-
scribed above. Do not use sharp instru-
ments, rubbing alcohol, flammable fluids or
abrasive cleaners. These can damage the
material. See "Important Safety Instruc-
tions" on page 3.
NOTE:
Do not remove any permanent
instruction labels inside your refrigerator. Do
not remove the Tech Sheet fastened under
the refrigerator at the front.
Cleaning
it before
use
After removing all packaging materials,
clean your refrigerator before using it, if
necessary. See cleaning instructions
on
pages 13 and 14.
Plugging
it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical
supply is required. It is recommended
that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
&prong grounding
type wall receptacle
See Electrical Requirements
and Ground-
ing Instructions
Sheet in your Literature
Package.
grounding
plug
5
Advertisement
Table of Contents
