Removing The Snap-On Door Trivet; Removing The Door Trim; Adjusting The Door Bins - Whirlpool ED22ZRXDN00 Use And Care Manual

Removing the snap-on door trivet
(on some models)
To remove the trivet:
1.
Remove all items from the shelf.
2. Pull out on the inside tab at each end.
3. Lift trivet straight out.
To replace the trivet:
1.
Line up ends of the trivet with the button on the door
liner wall.
2. Push trivet straight back until it snaps securely into
place.
3. Replace items on the shelf.
Removing the door trim (dispenser area)
(on some models)
Remove the trim above the dispenser area for
easier cleaning.
To remove the trim piece:
1.
Remove all items from the shelf.
2. Pull straight up at each end of the trim piece.
To replace the trim piece:
1.
Line up each end of the trim piece above the trim
pocket opening in the door liner wall.
2. Push the trim piece straight down until it stops.
3. Replace items on the shelf.
To remove door bins:
1.
Lift bin up.
2. Pull bin straight out.
To replace door bins:
1.
Slide bin in above desired support button.
2. Push down until it stops.
Adjusting the door bins
11 /Suppofl
button .,,I
7