Using The Automatic Ice Maker - Whirlpool ED22PC Use And Care Manual

Using the automatic ice maker
Here are a few things you will want to know
about your automatic ice maker:
l
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE:
Do not turn ice maker on until it is
connected to the water supply.
Instructions
for ice maker water supply hook up are
attached to the back of the refrigerator
cabinet.
l
It is normal for ice crescents to be attached
by a corner. They break apart easily.
l
The ice maker will not operate until the
freezer is cold enough to make ice. This can
take overnight.
l
If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a day
and, if necessary, turn the Freezer Control
toward C.
l
Good water quality is important for good ice
quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from
a
malfunctioning softener) can damage the ice
maker mold and lead to poor ice quality. If a
softened water supply cannot be avoided,
make sure the water softener is operating
properly and well maintained.
UP to
stop ice
maker.
DOWN to
start ice
I
maker.
15