Setting The Controls; Changing The Control Settings; Power Saving Control - Whirlpool ED19HK Use & Care Manual

Temperature Control
I
Air Outlet
Setting the controls.. . Glve the refrigerator time to cool down com-
The Temperature Control IS in the refrigerator and
pletely before adding food.
[This may take sev-
the Air Control is in the freezer section. When the
era1 hours.)
refrigerator is plugged in for the first trme.
These settings should be about right for
54@,' ,F5
normal household refrigerator usage.
The controls will be set about rrght when milk or
juice
IS
as cold as you like and when ice cream
IS
firm.
3
Do not block the air outlet
on the control panel.
1. Set the TEMPERA-
2. Set the AIR CON-
Blocking It can slow the air movement needed to
TURE CONTROL to 3.
TROL to 3
keep temperatures at the level you
Set.
Changing the control settings.. .
If vou need to adjust temperatures In the refrlger-
l
Adjust the Temperature Control first.
ator or freezer, use the settings listed in the chart
l
Wait at least 24 hours between adjustments.
below.
l
Then adjust the Air Control, If needed.
I
If Refrigerator
Door opened often Temperature Control 4
Section is
Large amount of food added
Air Control
3
\
t?
TOO WARM
Room temperature too warm
If freezer Door opened often
Temperature Control 3
Section is Large amount of food added
Air Control
4
TOO WARM Very cold room temperature
QUESTIONS?
[can't cycle often enough)
.-call your If Refriaerator
Controls not set correctlv
Temperature Control 2
COOL:LINE q Sectio; is
service TOO COLD
assistance
If ICE isn't
telephone
number
MADE FAST ENOUGH
(page 15).
If BOTH SECTIONS
are TOO WARM
for your conditions
Heavy ice usage
Very cold room temperature
[can't cycle often enough]
Door opened often
Larae amollnt of food added
Atr Control 3
Temperature Control 3
Air Control
4
Temperature Control
3
Arr Control
2
Very warm or very cold
Power Saving Control.. .
The Power Savlna Control
on the Control Con-
sole operates elec6c heaters around the door
1. Use the "OFF" set- 2.
openings. These heaters help keep moisture from
ting when humidity
forming on the outside of the refrigerator.
IS low.
Use the "0N"setting
If mojsture forms
on the outsrde of the
refrigerator.
I