Table of Contents
Advertisement
en-moving
the base gril le
To remove the grille:
1. Open both doors.
2.
Pull base grille forward to release the
support tabs from the metal clips.
3.
Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
I. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions
for defrost pan
condenser coils on page 19.
and
Changing
the light
bulbs
Condenser
coils
Electrical
Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could result in per-
sonal injury.
To change refrigerator
light:
1. Disconnect refrigerator from power supply.
2.
Reach behind the Control Console to
remove bulb.
3. Replace bulb with a 40-watt appliance
bulb.
4. Reconnect refrigerator to power supply.
To change crisper
light:
1. Disconnect refrigerator from power supply.
2.
Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To change light below ice bin:
1. Disconnect refrigerator from power supply.
2.
Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance
bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
16
Advertisement
Table of Contents
