Whirlpool 3ET22DKXDN00 Use And Care Manual page 11

To remove the shelf:
1. Remove all items from the shelf.
2. Hold back of shelf with one hand.
3. Lift front of shelf to 45" angle.
4. Lower shelf slightly to release shelf from
upper channel of track. Then pull shelf
straight out.
NOTE: Shelf is heavy. Make sure you use
both hands when removing shelf.
Hold with both hands
and lift front to 45" angle.
To remove shelf track:
1. Lift both sides of track slightly.
2. Pull track straight out.
I II II
Hold both sides and
lift up and out.
To replace shelf track:
1. Guide track hooks into the shelf support
slots on the back wall of the cabinet.
NOTE: Make sure both track hooks are in
slots and that the slots are parallel to
each other.
2. Push track backward and down.
3. Check that track is completely seated in
the shelf supports.
Make
sure
both
sets of
hooks
are in
support
slots.
Shelf
/ suPPoe
To reinstall shelf:
1. Hold shelf at front and back.
2. Tilt front of shelf up to a 45" angle to
track.
3. Insert both rear shelf slides into upper
channel of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are
securely in the track before letting go of
shelf.
Upper channel
slides into
upper channel
of track.
10