Changing The Control Settings; Removing The Door Shelf Fronts - Whirlpool 3VED23DQ Use And Care Manual

Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section
too warm
_______ --.- .__._-- - - - - I_
RECOMMENDED
REASON:
CONTROL SElTINGS:
__I---._--_.-- -.-- --
l
Door opened often
l
Large amount of food added
Refrigerator 4
Freezer
A
l
Room temoerature too warm
Freezer
section
too warm
Refrigerator
section
too cold
l
Door opened often
l
Large amount of food added
l
Very cold room temperature
(can't cycle often enough)
l
Controls not set correctly
for your conditions
Refrigerator 3
Freezer C
Refrigerator 2
,
Freezer
B '
Ice not
made fast
enough
Both
sections
too warm
l
Heavy ice usage
l
Very cold room temperature
(can't cycle often enough)
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
Refrigerator 3
Freezer
C
Refrigerator 4
Freezer
B
Removing the door shelf fronts
(on some models)
Remove the door shelf fronts for easier
cleaning.
To remove shelf fronts:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the shelf front.
3. Pull shelf front straight out.
To replace shelf fronts:
1. Line up each end of the shelf front with
the button on the door liner wall.
2. Push shelf front straight back until it
snaps securely into place.
3. Replace items on the shelf.
9