Whirlpool 3ED20PK Use And Care Manual page 8

hanging the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
r---- _------
RECOMMENDED
CONDITION: REASON:
CONTROL SElTINGS:
If Refrigerator Door opened often
Refrigerator 4
Section is
Large amount of food added
Freezer A
TOO WARM Room temperature too warm
-
If Freezer
Door opened often
Refrigerator 3
Section is
Large amount of food added
Freezer
C
TOO WARM
Very cold room temperature
(can't cycle often enough)
If Refrigerator Controls not set correctly
Refrigerator 2
Section is for your conditions
Freezer B
TOO COLD
If ICE isn't Heavy ice usage
MADE FAST Very cold room temperature
ENOUGH (can't cvcle often enouah)
Refrigerator
Freezer
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 4
Freezer
B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
3. Lower front of shelf to level position.
Glass shelves are
heavy. Be careful.
8