Pași
1. Locate the system board slot on your computer.
2. Align and install the HDD into the computer
3. Install the four (M2x2.7) screws that secure the HDD to the computer.
4. Connect the HDD cable on to the connector on the system board.
Pașii următori
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Bateria rotundă
Removing the Coin-cell
Cerințe preliminare
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
Despre această sarcină
The figure indicates the location of the Coin-cell and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Dezasamblarea și reasamblarea
35