Table of Contents
Advertisement
INITIAL SETUP
Read safety
Please read the safety instructions first before you use the TV.
In Help, go to Safety and Screen care.
TV stand installation and wall
mounting instructions
TV stand installation
You can find the instructions on how to install the TV stand in
the Quick Star t Guide that come together in the car ton box
when you unpack the TV. In case you have misplaced your Quick
Star t Guide, you can download it from www.philips.com. Use the
product type number of the TV to look for the Quick Star t Guide
to download.
Wall mounting instructions
Your TV is also prepared for a VESA –compliant wall mount
bracket (sold separately).
Use The following VESA code when purchasing the wall mount.
To fix the bracket securely, use screws with a length indicated
in the drawing.
VESA
TV
L
min.&max.
Tips: This picture is only for reference.
Take note of the following, the "L" is stand for the thickness of
VESA.
40PFS4052/60 :
VESA MIS-F 200x100mm.
Top side M4x25mm.
Bottom side M4x25mm.
Caution:
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall Mounting should
meet safety standards according to TV's weight. Also read the
safety precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for improper
actions.TV mounting that results in accident, injur y or damage.
Tips on placement
• Position the TV where light does not shine directly on the
screen.
• Position the TV up to 15cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen
size. When seated your eyes should be level with centre of
screen.
Power cable
• Inser t the power plug into the outlet complete.
• Make sure that power plug in the wall socket is accessible at all
time.
• Tips: If you do not use the TV for a long period of time, please
unplug the power cord.
Antenna cable
• Inser t the antenna plug firmly into the ANTENNA socket at
the back of the TV.
• You can connect your own antenna signal from an antenna
distribution system. Use an IEC Coax 75 Ohm RF antenna
connector. Use this antenna connection for DVB-T and DVB-C
input signals.
Satellite dish
For PHS and PFS models.
Attach the satellite F-type connector to the satellite connection
SAT at the back of TV.
5
Advertisement
Table of Contents
