NetComm Dynalink NB6Plus4Wn Quick Start Manual
Iptv setup
Hide thumbs
Also See for Dynalink NB6Plus4Wn:
- User manual (170 pages) ,
- Setup manual (17 pages) ,
- Quick start manual (2 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for NetComm Dynalink NB6Plus4Wn
Summary of Contents for NetComm Dynalink NB6Plus4Wn
- Page 1 IPTV Setup (NB6Plus4Wn)
- Page 2 IPTV This guide will take you through the process of configuring a VLAN on your modem / router to work with IPTV.* Navigate to http://192.168.1.1 in a web browser. Enter 'admin' for both the username and password and click Ok.
- Page 3 Select Advanced > Internet > Connections. Press the Add button on the right hand side of the screen.
- Page 4 Enter 0 into the VPI field and 35 into the VCI field with UBR without PCR as the Service Category. Press the Next button.
- Page 5 Select Bridging as the connection type protocol with LLC/SNAP as the encapsulation type. Quality of Service (QoS) is recommended. 802.1Q VLAN Tagging is optional and not required for the IPTV service. Press the Next button.
- Page 6 Leave the WAN IP Settings as default 'none' unless otherwise specified by your IPTV provider. Press the Next button.
- Page 7 Ensure 'Enable this Internet Connection' is selected. You may change the connection name to something descriptive such as IPTV if you would prefer it. Press the Apply button. Your NB6Plus4Wn is now configured for IPTV.