Using The Off/Cancel Pad; Audible Signals - Whirlpool RS386PXB Use And Care Manual

After the countdown is over, three short
tones will sound, followed by one tone that
sounds every six seconds until you press
any other command pad.
To reset the Minute Timer:
Repeat Steps 1 and 2 on page 12.
To cancel the Minute Timer:
Press Timer On/Off pad until TIMER stops
flashing on the display (about 4 seconds).
TIMER
ON/OFF
Using the Off/Cancel pad
The Off/Cancel pad will cancel any function
except for the Clock and Timer functions.
When you press the Off/Cancel pad, the
display will show the time of day or, if
Minute Timer is also being used, the time
remaining.
0 q
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off repeating endof-timer
countdown signal:
1. Press and hold
the Off/Cancel pad for
10 seconds.
2. A short tone will sound to tell you the
signal has been changed.
Repeat the above steps to turn the signal
back on.
13