Table of Contents
Advertisement
Surface elements and reflector bowls
1.
Make sure all knobs are turned
to OFF.
2. Lift the edge
of the element,
opposite
the receptacle,
just
enough
to clear the reflector
bOWI and trim ring.
3. Pull the surface element
straighi
away
from the receptacle
4. Lift out the reflector
bowl and trim
ring
See Cleaning
Chart on page
22
for cleaning
instructions.
Replacing
1.
Make sure all knobs are turned
to OFF.
2. Line up opening
in the reflector
bowl and notch in the trim ring
with the surface element
receptacle.
continued
on I next page
Advertisement
Table of Contents
