Whirlpool RF395LXE Use & Care Manual page 42

CARING FOR YOUR RANGE
R
EMOVING THE OVEN DOOR
For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions in this section.
NOTE: If the door removal pins included in the
Anti-Tip Bracket Package are not available, nails or
screws may be used. Be careful that the length of
the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.
To remove:
1.
Open the door about halfway. Insert door
removal pins into both hinge hangers. Do not
remove them while the door is removed from
the range.
2.
Close the door as far as the door removal pins
will let you.
3.
Rotate the door toward the range. Lift up the
door until it stops. Do not use the door handle to
lift the door. Rotate the door toward the floor and
pull it toward you.
42
Insert door removal
pin here
Oven door
Oven door
Range
Hinge
hanger
Rotate
Range
Lift up