Lift-Up Cooktop - Whirlpool RF390PXV Use And Care Manual

3. When the terminal is pushed into the
receptacle as far as it will go, push
down the edge of the surface unit
opposite the receptacle. The element
hold down clip will keep the surface
unit from moving around.
Reflector bowls reflect heat back to
the utensils on the surface units. They
also help catch spills. When they are
kept clean, they reflect heat better and
look new longer.
If a trim ring gets discolored, some of
the utensils may not be flat enough, or
some may be too large for the surface
unit. In either case, some of the heat
that's meant to go into or around a uten-
sil goes down and heats the trim ring.
This extra heat can discolor it. See
Cooking Guide for further information.
Fire or Electrical Shock Hazard
Do not line the reflector bowls
with foil. Fire or electrical shock
could result.
Lift-up cooktop
1. Lift front of cooktop at both front
corners until the support rods lock
into place.
Personal Injury Hazard
I
Be sure both support rods are
fully extended and in the locked
position. Failure to do so could
result in personal injury from the
cooktop accidentally falling.
2. Wipe with warm soapy water.
Use a soapy steel wool pad on stub-
born spots.
19