Requesting - Whirlpool RF375PXE Use & Care Manual

TROUBLESHOOTING
C
OOKING RESULTS
PROBLEM
Cooking results are
not what you expected
D
ISPLAY MESSAGES
PROBLEM
The display is showing
"PF"
"F" followed by a number
shows on the display
The indicator light(s)
is flashing
If none of these items are causing your problem, see "Requesting Assistance or Service" on page 41.
40
CAUSE
•
The oven temperature seems too low or too high. See "Adjusting the oven
temperature control" on page 19 to adjust the oven temperature.
•
You did not preheat the oven before baking (if called for in the recipe).
•
You are using a pan that is not the correct type or size. Refer to a reliable
cookbook or recipe for the recommended pan type and size.
•
There is not enough air space around the pan when baking. Allow 1
2 inches of air space on all sides of the pan.
•
The cookware is too large or too small for the surface cooking area being
used. The pan should be the same size or slightly larger than the surface
cooking area being used.
•
The range is not level. (See the Installation Instructions.)
CAUSE
•
There has been a power failure. Press the off/cancel pad to clear the display.
•
Press the off/cancel pad to clear the display. If an "F" code appears again,
call for service. (See "If You Need Assistance or Service" on page 41.)
•
The function(s) indicated may not be working. Refer to the section in this Use
and Care Guide discussing the function. If the indicator light(s) keeps flashing,
call for service. (See "If You Need Assistance or Service" on page 41.)
1 ⁄ to
2