Requesting - Whirlpool RF370PXG Use And Care Manual

C
OOKING RESULTS
PROBLEM
Cookware not level
on cooktop
(Check to see if liquids
are level in cookware)
Excessive heat on cooktop
in areas around cookware
The oven temperature
seems too low or too high
Slow baking or roasting
Baked items too brown
on bottom
Unevenly baked items
Crust edge browns
before pie is done
D
ISPLAY MESSAGES
PROBLEM
The display is showing
"PF"
"F" followed by a
number shows on
the display
If none of these items are causing your problem, see "Requesting Assistance or Service" on page 38.
SOLUTION
•
Level the range. (See the Installation Instructions.)
•
Insert coil correctly.
•
Use cookware with a flat bottom.
•
Choose cookware the same size or slightly larger than the element.
•
Adjust the oven temperature control. (See "Adjusting the oven temperature
control" section.)
•
Increase baking or roasting time.
•
Increase temperature 25 F.
•
Preheat oven to selected temperature before placing food in when
preheating is recommended.
•
Choose bakeware that will allow 2 inches of air space around all sides.
•
Open oven door to check food when timer signals shortest time suggested
in recipe.
•
Oven peeking can make cooking times longer.
•
Preheat oven to selected temperature before placing food in oven.
•
Choose bakeware that will allow 2 inches of air space around all sides.
•
Position rack higher in oven.
•
Decrease oven temperature 15 to 25 F.
•
Level the range.
•
Bake in center of oven with 2 inches of space around each pan.
•
Check to make sure batter is level in pan.
•
Shield edge with foil.
CAUSE
•
There has been a power failure. Press OFF/CANCEL to clear the display,
then reset the clock. (See page 15.)
•
Press OFF/CANCEL to clear the display. If an "F" code appears again, call
for service. (See "If You Need Assistance or Service" on page 39.)
TROUBLESHOOTING
37