Epson WF-7620 / WF-7610 / WF-7110 Series
3.2.3 Touch Panel Adjustment (WF-7620/7610 Series only)
This section describes the Touch Panel adjustment
Purpose
To adjust the origin of the Touch Panel.
Tools
Touch pen (without a sharp end such as a plastic stick)
During in the Touch Panel Adjustment mode, operations such as menu selection can be done
by pressing the following buttons on the panel.
Adjustment procedure
1. Start the printer in the Touch Panel Adjustment mode by turning it on with the [HOME] button (1), [*] (2),
[Stop] (3), and [Power] button (4) on the panel simultaneously.
4
2. On the displayed menu screen, select "4. Touch Screen Inspection" and press the [Color] button.
Adjustment
Power
Figure 3-10. Panel Operation in Touch Panel Adjustment Mode
1
Figure 3-11. Touch Panel Adjustment (1)
Run:Color / Select:[3][6]
1.Mechanism Inspection
2.Special Inspection
3.FAX Inspection
4.Touch Screen Inspection
5.Development Mode
6.FAX Development Mode
7.Nomal Mode
Figure 3-12. Touch Panel Adjustment (2)
Details of Adjustments
[3]
Moves up menu selection.
Moves down menu selection.
[Color]
Enter
2
3
Revision B
[6]
71
Confidential